A heavy duty medium temperature smoke door bottom seal. The seal is achieved by a pair of nylon brush strips with a medium temperature smoke barrier. The seal can be checked out or drilled to accommodate the pivot, thereby providing a continuous seal. Can be used in conjunction with RP130Si, other Raven perimeter seals and threshold plates.
Location: Bottom of double butt hinged or centre pivot double acting doors.
Min/Max Gap: 15mm to 18mm.
Finish: Satin clear (silver) anodised aluminium (15micron) or paint at extra cost.
Fixing: Screw fix. Zinc plated, cross recess head S.T. screws supplied.
Seal: RP52F. Black fine and dense nylon filaments, UV stabilised medium temperature smoke barrier fin and galvanised steel spine.
Sizes: Available in stock lengths.
Approvals
Smoke AUS/NZ: NCC Spec. C3.4. NZ BC Compliance Doc. C/AS1 6.19.2(b). AS1530.7 & BS EN 1634-3 (similar to BS 476 section 31.1). Meets smoke leakage rates specified in AS6905 & EN 13501-2 “Sa”, “Sm”.
Energy NCC Pt. 3.12.3.3 & J3.4.
Durability Tested to over 1,000,000 operating cycles without failure.
Patented, Registered Design.













Reviews
There are no reviews yet.